вторник, 30 апреля 2013 г.

DAF 95XF Преобразователь - радио

35. CONVERTER/RADIO

The following description of operation and
installation is merely advisory.
Read the manufacturer’s installation
instructions supplied with the radio.
If the contact switch (C539) is activated in
accessory position 1, pin 1 is connected to pin 6
(wire 1100 to wire 1130). As a result, relay G178
is activated. A voltage is now applied to pin 2 of
the voltage converter (D525) through the
contacts of relay G178 and fuse E027.
The converter reduces this voltage to a 12V
voltage and applies it to point 4 (D525).
This 12V voltage is fed to the radio (B185)
through wire 1108.
The radio is equipped with one antenna
connection and two loudspeaker outputs used to
connect loudspeakers B024 and B025. Two
filters for the loudspeakers can also be
connected to the radio. To each of these filters
(B186 en B187) two loudspeakers can be
connected (B178, B179 and B180 and B181).
The 12V output (pin 4) of the converter (D525)
can also be connected to a CB transmitter
(B026) to provide it with a supply voltage.
VARIANTS
Location
29 The converter should be connected to the
existing wiring to feed the memory function
(wire 1107). This can be done using a
voltage converter. This converter can be
obtained as an accessory.
37 Wire No. 2630. This wire should be
connected to one of the control lighting
switch wires.
31 Wire No. 1108. This wire should be
connected to wire 1108 coming from the
24/12V converter.




Комментариев нет:

Отправить комментарий