DAF 95XF Управление освещением

19. CONTROL LIGHTING
CONTROL LIGHTING
The control lighting consists of the lamps and
LEDs in the various function switches.
When the lighting switch (C622) is being
operated, a supply voltage will be applied to
relay G000 through fuse E084 and lighting
switch (C622), wire 2100.
Relay G000 is activated so that a voltage is
applied to the control lighting (wire 2630)
through fuse E117, causing it to light up.
When switch C622 is being operated, the
following lamps will light up:
B030, C072, C760, C802 (so-called functional
lighting).
The following switches will cause a LED to light
up:
C725, C726, C727, C731, C733, C734, C735,
C736, C737, C739, C740, C741, C742, C748,
C749, C750, C751, C752, C754, C761, C763,
C764, C765, C778 and C803.
LIGHTING BUZZER
When the lighting switch (C622) is being
operated, a supply voltage will be applied to
relay G000 through fuse E084 and lighting
switch (C622), wire 2100.
Relay G000 is activated so that a voltage is
applied to the control lighting (wire 2630)
through fuse E117. This wire is also connected
to the electronic unit CWS-2 (D853), pin B12.
A signal from the door switch is also applied to
pin 5/396 of the electronic unit CWS-2 (D853). A
signal from the alternator (A502) is also applied
to the electronic unit CWS-2 (D853) (pin 6/396).
If no voltage is measured from the alternator,
the door is open (pin 5/396 of the CWS-2 is
connected to earth through lamp C062) and a
voltage is also applied from input 12/396, the
buzzer is activated.
VARIANTS
Location
37 Switch C737 is only used in XF-type
vehicles. Switch C738 is used in VF-type
vehicles.

Оглавление...